********************************************************************
Name: 	OQO Firmware Updater  

Filename: 	OQOManager.exe
 
Target OS: 	XP Pro/Home/Tablet, 01 & 01+

Version: 	1.0.0.11 (installer) 1.02.23 (BIOS)

Replaces: 	BIOS/Firmware updater 1.02.20 Windows installer, for both 01 and 01+ 	954Kb 12/12/05

Overview: 	
This is an updater to bring BIOS version up to 1.02.23

What's new:	
PXE implementation courtesy of Argon.  Note that you will have to use Argon's RISME network shim in order to use PXE with most network boot situations; for more information see the attached helpfile.
*********************************************************************

Installation instructions
^^^^^^^^^^^^^^^^^^^^^^^^^
Instructions for BIOS updater, v1.02.23

- Unzip file
- Close all applications
- disconnect any external devices, including the docking cable
- Make sure you are plugged into AC power
- Run OQOFirmwareUpdater
- Watch the progress bar as the firmware is updated; when finished, the status message will read "Success.  Please reboot your system"
- Click the 'Quit' button
- Reboot

You have now updated your firmware.  If you would like to confirm, do the following:

Boot into BIOS: 
 - Reboot your OQO, and
 - During the OQO splash screen, press FN-2 a few times.  BIOS configuration will load.
 - Exit > Version Info
 - Version info should confirm BIOS Version 1.02.23





